Bizerba GSP H - Blade Sharpening

Instruction manual GSP Maintenance
38107010002 en-US 69 / 92
Tilt carriage inwards
Place the product holder on the carriage.
Tilt the carriage in the direction of the ar-
row.
Using handle, screw into place on the
carriage foot.
Fig.99: Tilt carriage inwards GSP H
Fig.100: Tilt carriage inwards GSP HD
The machine is ready for operation.
WARNING
Missing components!
The operator can only be protected from injuries and the machine
protected against damage if all the components of the machine are
assembled properly.
– Check if the machine is complete before it is re-started.
– Check if components are positioned correctly and firmly.
– Only use original Bizerba spare parts and accessories.
8.6 Blade sharpening
Re-sharpening is necessary if the slicing result is unsatisfactory.