Safety instructions Instruction manual GSP
20 / 92 38107010002 en-US
3 Safety instructions
3.1 General notes on safety
DANGER
Damaged power supply cables or faulty protective devices!
danger to life due to electric current Acute risk of injury of operating
personnel.
– Damaged supply lines must be replaced immediately with new cables
and installed by a professional electrical company or by Bizerba Ser-
vice.
– The mains cable must be routed in a way that it is no cause of risk.
– Protective devices must be checked every day with regards to function
before start-up.
– Protective devices may not be removed, modified or bypassed.
DANGER
Open the electrical installation area!
danger to life due to electric current
– The electrical installation area may only be opened by Bizerba Ser-
vice.
– Pull power plug before moving the machine.
WARNING
Unauthorized persons!
Serious injuries to fingers and hands and damage to health.
– Only trained personnel over 14 years may operate, clean and maintain
the machine. [}6] Subsequent training to be repeated on a regular ba-
sis.
– Unauthorized persons, particularly children, may not stay in the work
area of the machine.
Medical information for persons with active implants
Active implants are, e.g. pacemakers or defibrillators. If a safety distance of 30cm is main-
tained between field source and implant, it might be very unlikely that active implants are af-
fected in any way.
Non-ionizing radiance is not generated intentionally, but is a technical effect caused through
electrical equipment: e.g. electric motors, high-voltage cables or magnetic coils. Furthermore,
the device is not equipped with strong permanent magnets.
To Next Page
Loading...
Need help?
General
