Bizerba GSP H User Manual

Instruction manual GSP Machine and operating elements
38107010002 en-US 35 / 92
5.5 Product holder
Machines with a carriage inclination of 0° and 18°
GSPH:
When placing the product on the carriage,
the product holder can be lifted up to its un-
stable equilibrium.
For slicing purposes, the product holder is
set on top or behind the product. The prod-
uct is moved towards the blade by means of
its own weight.
Fig.23: GSP H, example
GSPHD:
In order to position the product, the product
holder is moved outwards and up and locked
in its final position.
For slicing purposes, the product holder is
set on top or behind the product. The prod-
uct is moved towards the blade by means of
its own weight.
Fig.24: GSP HD, example
Machines with carriage inclination of 25°
For slicing purposes, the product holder is
set on top or behind the product. The prod-
uct is moved towards the blade by means of
its own weight.
When the product is extremely long, it does
not make sense to use the product holder.
Therefore, use handle to move it to the ex-
treme right and position it underneath the
carriage. Does not apply to carriage ver-
sions.
Fig.25: GSP H, example

Bizerba GSP H Specifications

General

Type	Slicer
Blade Diameter	330 mm
Cutting Thickness	0 - 24 mm
Material	Anodized aluminum
Operation	Manual
Voltage	230 V
Frequency	50 Hz
Protection Class	IP33