Maintenance Instruction manual GSP
74 / 92 38107010002 en-US
Insert a dry disposable cloth from the
front between blade and guard ring.
Fig.108: Blade guard ring
Using your hands, turn blade and dis-
posable cloth; while doing so, slightly
press cloth against inner side of the
guard ring.
Fig.109: Blade guard ring
Machine housing:
Remove sharpening dust from the surfaces using a dry disposable cloth or brush.
If necessary, carry out a complete cleaning cycle.
Prepare machine for operation. [}66]
WARNING
Missing components!
The operator can only be protected from injuries and the machine
protected against damage if all the components of the machine are
assembled properly.
– Check if the machine is complete before it is re-started.
– Check if components are positioned correctly and firmly.
– Only use original Bizerba spare parts and accessories.
8.7 Care of machine, servicing, maintenance
The entire machine must be thoroughly cleaned. [}56]
To Next Page
Loading...
Need help?
General
