Safety instructions Instruction manual GSP
22 / 92 38107010002 en-US
CAUTION
There are spikes on the product holder!
Risk of injury.
– Use handle when working with product holder.
– Before you begin slicing, always position the product holder on or be-
hind the product.
3.4 Safety instructions for sharpening, cleaning
WARNING
Unprotected blade!
Coming in contact with the sharp blade can lead to serious injuries.
– Always wear cut-proof gloves during the cleaning and sharpening pro-
cedures and shoes with toe caps when the blades are replaced.
– Do not clean the blades when operating the machine.
WARNING
Missing components!
The operator can only be protected from injuries and the machine
protected against damage if all the components of the machine are
assembled properly.
– Check if the machine is complete before it is re-started.
– Check if components are positioned correctly and firmly.
– Only use original Bizerba spare parts and accessories.
3.5 Protective and safety devices
– Blade guard ring, stationary, cannot be removed
– Blade cover closed, stationary, can be removed
– Carriage rear wall with thumb guard, non-removable
– Product holder on or behind the product
– Gauge plate, covering carriage stroke area
– Protective circuit for voltage cutoff
– Sharpener with protective cover of open blade area
– Forcibly guided product holder in cutting range of < 60mm.
To Next Page
Loading...
