Instruction manual GSP Safety instructions
38107010002 en-US 21 / 92
3.2 Safety instructions for transport and installation
CAUTION
Carriage might move due to its unladen weight.
Risk of hand injuries due to crushing!
– Be careful when unpacking.
WARNING
Incorrect supply voltage!
Destruction of electric components, fire hazard.
– Do not connect the machine to the power supply if the power supply
data does not correspond to the machine's connection values.
Mains data must be identical.
– Inform Bizerba Customer Service.
3.3 Safety instructions during operation, slicing
WARNING
Rotating blade!
Cut injuries.
– Do not allow yourself to become distracted. Concentrate on the task in
hand and avoid time pressure.
– When slicing, the carriage may only be moved by the handle.
– Do not put your hand underneath the remnant holder plate.
– During operation, do not reach into the path of the carriage.
– Never push product ends towards blade by hand.
WARNING
Moving components!
Risk of entanglement, shearing, crushing and being hit.
– Do not wear loose clothing or wear hair down.
– Do not reach into paths of carriage, product holder, gauge plate, de-
positing system, conveyor and depositing table.
– Only clean machine when switched off and power plug is pulled.
To Next Page
Loading...
