Maintenance
Instruction manual NSF VSI / VSI W / VSI T / VSI
TW
66 / 101 38065447002 en-US
Pull conveyor belt on support bar to-
wards operator.
Conveyor belt has been decoupled from
drive.
Fig.64: Decouple conveyor belt VSI T
Use both hands to hold on to the sides of
the center of the conveyor and tilt it to-
wards you and then lift it up.
Carefully place conveyor on an even sur-
face.
NOTICE!Damaged or twisted wire mesh-
ing causes functional errors.
Fig.65: Remove conveyor VSI T
Conveyor VSI TW
Push lock at belt support upwards.
Fig.66: Unlock conveyor belt VSI TW
To Next Page
Loading...
Need help?
General
