BK Precision 894 - Fail Beep; Language

73
Operation steps for setting PASS BEEP
1) Move the cursor to PASS BEEP, and the following softkeys will be displayed.
 HIGH LONG
This soft key selects a long, high tone beep.
 HIGH SHORT
This soft key selects a short, high tone beep.
 LOW LONG
This soft key selects a long, low tone beep.
 TWO SHORT
This soft key selects two short, low tone beeps.
 OFF
This soft key disables the pass beep function.
Fail Beep
Fail beep configures the beep when the measurement results do not pass the specified test
conditions.
1) Move the cursor to FAIL BEEP, and the following softkeys will be displayed.
 HIGH LONG
 This soft key selects a long, high tone beep.
 HIGH SHORT
 This soft key selects a short, high tone beep.
 LOW LONG
 This soft key selects a long, low tone beep.
 TWO SHORT
 This soft key selects two short, low tone beeps.
 OFF
 This soft key disables the pass beep function.
Language
This sets the display language of the instrument.
1) Move the cursor to LANGUAGE, and the following softkeys will be displayed.
 ENGLISH
This softkey selects English as the display language.
 CHINESE
This softkey selects Chinese as the display language.
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com