BK Precision 894 - Setup File (*.STA)

78
Setup file (*.STA)
40 user setup files (*.STA file) can be saved and recalled to and from the instrument. In
addition, users can use an external USB Flash drive (U-disk) to save/recall up to 500 setup files.
The settings stored in each Setup File are listed below:
 Settings on <MEASURE SETUP> page
 FUNCA
 FREQ
 LEVEL
 RANGE
 SPEED
 DC BIAS
 BIAS SRC
 TRIGG
 ALC
 DELAY
 Rsou
 AVG
 Vm
 Cm
 ISO
 DEV A
 DEV B
 REF A
 REF B
 Settings on <BIN COUNT DISP> page
 BIN COUNT (ON/OFF)
 Settings on <LIMIT TAABLE SETUP> page
 PARAM (swap parameter)
 NOM (reference value)
 MODE (%-TOL/ABS-TOL/SEQ-MODE)
 AUX (ON/OFF)
 COM (ON/OFF)
 High and low limits of each bin
 Settings on <List Sweep Setup> page
 List Sweep Mode (SEQ/STEP)
 List Sweep Parameter (Frequency/Level/Bias)
 Test points of all sweep parameters
 High and low limits of all test points, including limit parameters (LIMIT-DATA A/LIMIT-
DATA B)
 Page format currently displayed
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com