BK Precision 894 User Manual

74
Password
This configures the password–protection mode.
1) Move the cursor to PASSWORD, and the following soft keys will be displayed.
 OFF
This soft key disables the password protection mode.
 Hold SYSTEM
This soft key enables the password protection mode including file protection and boot up
password.
 Hold FILE
This soft key sets protection to user’s file.
 MODIFY
This soft key is used to change the password. The operation steps are as follows:
Press MODIFY to input a new password (password must be 4 digits). A message prompt will
ask for the new password. Input the new password again to confirm changes.
Note: The instrument has a default password 0895.
Bus Mode
This mode is used to select RS-232, GPIB, LAN, USBTMC or USBCDC(virtual COM) remote
interface.
1) Move the cursor to BUS, and the following soft keys will be displayed.
 RS-232C
 GPIB
 LAN
 USBTMC
 USBCDC
2) Use the above soft keys to select an interface for remote communication.
GPIB ADDR (895 only)
This configures the address of the instrument for remote communication via GPIB interface.
1) Move the cursor to GPIB ADDR, and the following soft keys will be displayed.
 ↑ (+)
a) This soft key is used to increase the GPIB address number.
 ↓ (-)
b) This soft key is used to decrease the GPIB address number.
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com

BK Precision 894 Specifications

General

Brand	BK Precision
Model	894
Category	Measuring Instruments
Language	English