3 Scroll to ‘exit’ and press the ‘menu’ button to close the menu display view.
The ‘shortcuts’ settings in URSA Viewfinder
Setup
The ‘setup’ menu provides the following features:
Brightness Adjustment
Allows adjustments for the brightness of the display with range -10 to +10.
Tally Brightness
Allows adjustments of tally LED brightness.
Focus Chart
Your Blackmagic URSA Viewfinder has a built in focus chart so you can focus the eye
piece to suit your eyes. Simply turn the focus diopter on the eyepiece until the chart is
in perfect focus. Pressing any button on your viewfinder will close the focus
chart display.
Frame Guides
Toggles the appearance of frame guides. When 'frame guides' are turned 'on' in your
URSA Mini's 'front SDI' monitor settings, you can use this setting to toggle the
appearance of these guides in your Blackmagic URSA Viewfinder.
For more information, see the 'Monitor Settings' section in this manual.
Safe Area Guide
Toggles the appearance of a safe area guide. When 'safe area guide' is turned 'on'
inyour URSA Mini's 'front SDI' monitor settings, you can use this setting toggle its
appearance in your Blackmagic URSA Viewfinder.
For more information, see the 'Monitor Settings' section in this manual.
Grid
Toggles the appearance of a rule of thirds grid, crosshair or center dot. When 'grids'
areturned 'on' in your URSA Mini's 'front SDI' monitor settings, you can use this setting
toggle their appearance in your Blackmagic URSA Viewfinder.
For more information, see the 'Monitor Settings' section in this manual.
144Blackmagic URSA Viewfinder
To Next Page
Loading...
Need help?
General
