Blackmagicdesign URSA Mini - Blackmagic URSA Mini Pro PL Mount

Blackmagic URSA Mini Pro B4 Mount
With the B4 mount attached to your URSA Mini Pro 4.6K, you can mount par-focal zoom lenses
commonly used for electronic news gathering and wedding videos. These lenses maintain
focus throughout large zoom ranges and typically have manual focus and iris control, plus a
zoom rocker on the hand grip allowing you to smoothly ease in and out of the zoom. For single
operators, using these lenses makes shooting very fast and efficient with exceptional control
over the shot.
The B4 mount kit includes:
1 x B4 mount
The B4 mount lets you use industry standard
ENGlenses with your URSA Mini Pro 4.6K.
1 x Shim set
The shim set includes the following thicknesses:
0.50mm
0.30mm
0.20mm
0.18mm
0.15mm
0.12mm
0.10mm
0.05mm
0.025mm
5 x 2mm Hex M2.5 x 12mm mount screws
The five M2.5 x 12mm HEX screws are exclusive to
the B4 so you can keep the screws together with
the respective mount.
The B4 mount kit also comes with a full spare sets
of screws in case the originals are misplaced.
Tools Required
When attaching the B4 mount, you will need a 2mm Hex driver. While it’s not absolutely
required, we recommend using a torque wrench able to accurately set a maximum torque
of0.45Nm to reduce the potential of over tightening the screws.
2mm Hex driver
197Interchangeable Lens Mount