Blackmagicdesign URSA Mini - Blackmagic URSA Mini Pro Shim Kit

Blackmagic URSA Mini Pro Shim Kit
When attaching the PL, B4 or F mounts to URSA Mini Pro 4.6K, a 0.10mm shim is added to the
original 0.50mm and 0.10mm shims underneath the original EF mount. This shim and others
areincluded in the Blackmagic URSA Mini Pro Shim Kit. Other thicknesses are included in the
kit in case you need to re-shim your camera to suit PL lenses that may require slightly different
clearances to maintain accurate focus marks.
The shim kit includes:
1 x Baffle tool
Use the baffle tool to loosen or tighten the PL baffle when
removing or attaching the PL mount to your URSA Mini
Pro 4.6K.
1 x Shim set
The shim set includes the following thicknesses:
0.50mm
0.30mm
0.20mm
0.18mm
0.15mm
0.12mm
0.10mm
0.05mm
0.025mm
204Interchangeable Lens Mount