Blackmagicdesign URSA Mini User Manual

Mounting and Connecting toBlackmagic URSA Mini
When using the Blackmagic URSA Studio Viewfinder with Blackmagic URSA Mini, you have the
option of mounting the unit to the camera in a number of ways.
You can mount the Blackmagic URSA Studio Viewfinder directly to the top of Blackmagic
URSAMini via the supplied V-lock mount plate which can be easily removed from the top
handle mount.
Unscrew the V-lock plate from the URSA Mini handle mount using a 3/16 Hex key, and then
attach it to the top of the camera with the supplied 1/4” screws. As this will make the center of
gravity on the camera much higher. We recommend doing this while the camera is attached to
atripod for stability.
If you are mounting the Blackmagic URSA Studio Viewfinder to your URSA Mini whilst using the
URSA Mini Shoulder Kit, you need to attach it using the supplied URSA Mini handle mount.
Attach the supplied URSA Mini handle mount to the top handle with three of the supplied 1/4”
screws using a 3/16 Hex key. Slide the Studio Viewfinder’s V-lock into the V-lock plate slot until
it clicks in securely.
See the ‘URSA Mini Shoulder Mount Kit’ section in this manual for more information.
IRIS
REC
FOCUS
F1
F2
148Blackmagic URSA Studio Viewfinder

Blackmagicdesign URSA Mini Specifications

General

Dynamic Range	15 stops
Sensor	Super-35mm CMOS
Resolution	4.6K (4608 x 2592)
Lens Mount	EF, PL
Recording Formats	Blackmagic RAW, ProRes
Media	CFast 2.0, SD cards (UHS-II)
Frame Rates	Up to 60 fps at 4.6K, 120 fps in HD.
Built-in ND Filters	2-stop, 4-stop, 6-stop
ISO Range	200 to 25600
Weight	2.5 kg (5.5 lbs)
Battery Life	Approx. 90 minutes (BP-U series)