BONFIGLIOLI Vectron ACTIVE CUBE - PROFINET Input Parameters (IN-PZD X)

8.3.3 PROFINET input parameters (IN-PZD x)
In the table below, the available input parameters of the PZD In objects are listed.
The content of the sources depends on the application. For the different data types,
the relevant input parameters must be linked to the sources of the frequency inverter.
• Availability of input sources depends on the number of configured PZD objects.
• Each configured PZD object comprises either two Boolean, two Word or one Long
input parameter(s).
• A PZD input object can only be used for one data type (depending on the re-
quirements of the application).
• The first PZD object configured (obligatory) represents PZD1/2 with fixed contents
and functions.
Number of
configured
PZD objects
Boolean parameter
Word parameter
Long parameter
Identification
Parame-
ter no.
Identification
Parame-
ter no.
Identification
Parame-
ter no.
2
In-PZD 3 Boolean
1300
In-PZD 3 Word
1302
In-PZD 3/4
Long
1304
In-PZD 4 Boolean
1301
In-PZD 4 Word
1303
3
In-PZD 5 Boolean
1305
In-PZD 5 Word
1307
In-PZD 5/6
Long
1309
In-PZD 6 Boolean
1306
In-PZD 6 Word
1308
4
In-PZD 7 Boolean
1310
In-PZD 7 Word
1312
In-PZD 7/8
Long
1314
In-PZD 8 Boolean
1311
In-PZD 8 Word
1313
5
In-PZD 9 Boolean
1315
In-PZD 9 Word
1317
In-PZD 9/10
Long
1319
In-PZD 10 Boolean
1316
In-PZD 10 Word
1318
6
In-PZD 11 Boolean
1320
In-PZD 11 Word
1322
In-PZD 11/12
Long
1324
In-PZD 12 Boolean
1321
In-PZD 12 Word
1323
By default, the input parameters are set to Off or Zero, except Parameters 1302,
1303, 1307 and 1308.
The default settings of input parameters 1302, 1303, 1307 and 1308 is compati-
ble with the CM-PDP module:
In-PZD 3 Word 1302 = 770 PDP Effective Current
In-PZD 4 Word 1303 = 771 PDP Active Current
In-PZD 5 Word 1307 = 772 Warning Status
In-PZD 6 Word 1308 = 773 Error Status
10/13 CM-PROFINET 45