DS7200V2-EXP | Installation Guide | 4. Reference Materials
EN | 108
Bosch Security Systems, Inc. | 04/12 | F01U253045-02
4. Reference Materials
4.1 Control Panel Events and Reporting Formats
The following table includes each control panel event, the description for each event as it appears in
the control panel log, the reports sent for each event, the zone types linked to the event, and the RPS
Event Alert Group number. The RPS Event Group numbers also correspond with the Personal Dialing
Format Event Group numbers. See Personal Dialing Format on page 51 for more information.
The last column, Status Reports, indicates System Status events. An “R” indicates that reports for the
event follow the System Status routing. An “S” indicates that the event follows the System Status
Swinger Count. System reports do not include an Area number; they use the account number for Area
1.
If the control panel is configured for network communication, reports are sent using the Contact ID
format.
The event numbers shown in the following table are the same numbers that show up on a pager for
each corresponding report.
To Next Page
Loading...
