DS7200V2-EXP | Installation Guide | 2. System Installation
and Setup
EN | 46
Bosch Security Systems, Inc. | 04/12 | F01U253045-02
Follow these steps to edit the data digit entry for
an address:
1. Enter the address.
2. Press the [#] key.
3. Enter the new value (0 to 15).
4. Press the [*] key.
For example, to change the data digit for Address
0221 from 0 to 1, press the following keys in this
order: [1][*]. The new value appears on the
second line of the display.
Adr: 0221 D=0 Keypad display before making any
changes. Current Data Digit entry
shown.
Adr: 0221 D=0 Press [1] to change Data Digit entry
from 0 to 1.
1
Adr: 0221 D=1 Press [*] to accept new Data Digit
entry. Display updates new entry.
Follow these steps to fix an incorrect data digit
entry:
1. Press [#].
2. Re-enter the address you wish to program.
3. Press [#].
4. Enter the desired data digit value (0 to 15).
5. Press [*].
Certain addresses are skipped during keypad
programming: Reserved addresses and Expert
addresses. Table 20 identifies these addresses.
• Reserved Addresses: These addresses are
reserved for future development.
• Expert Addresses: These addresses are only
available when the control panel enters
Expert Programming Mode.
Table 20: Reserved and Expert
Addresses
0214-0219 0214-0219 0065
0237 0237 0132-0180
0274-0275 0274-0275 0222-0236
0282-0285 0282-0285 0238-0248
0292-0295 0292-0295 0255-0257
0304-0307 0304-0307 0260
0314-0317 0314-0317 0262-0273
0326-0329 0320-0363 0297
0336-0339 0826-0905 0319
0348-0351 1035-1037 0341
0358-0361 1128-1183 0363-0378
1035-1037 1252 0703
1252 1262 0906-1034
1262 1522-1649 1038-1043
2940-2943 2418-2929 1251
2945-3405 2940-2943 1253-1261
3430-3433 2945-3405 1263-1265
3434-3441 3430-3433 2930-2939
3442-3505 3434-3441 2944
3542-3545 3442-3505 3406-3413
3554-9999 3542-3545 3507-3513
3554-9999 3515-3521
3523-3529
3539-3540
3886-3910
Press [#] to move forward to the next available
address. Press [*] to move back to the previous
available address.
To Next Page
Loading...
