Bosch DS7200V2-EXP - User Keypad Commands Reference

DS7200V2-EXP | Installation Guide | 4. Reference Materials
EN | 126
Bosch Security Systems, Inc. | 04/12 | F01U253045-02
4.6 User Keypad Commands
Table 46: System Arming/Disarming Functions
Function
Keypad Sequence
Turn the System All On [On] or [#][1]
Turn the System Perimeter Only
On
[Perimeter Only] or [#][2]
Turn the System Partial On [#][3]
Bypass Zones [Bypass]
Turn the System Off Enter a valid User PIN
Silence Alarms Enter a valid User PIN
Table 47: Other System Functions
Function
Keypad Sequence
View Faulted Zones [*]
System Reset [System Reset] or [#][4][7]
Check System Troubles [#][4]
View Alarm Memory [#][4][0]
System Test [#][4][1]
View System Trouble [#][4][2]
Remote Program [#][4][3]
Walk Test [#][4][4]
Change Date and Time [#][4][5]
View Zone Trouble [#][4][8]
Keypad Adjust [#][4][9]
Move to Area [#][5][0]
Extend Auto-On Time [#][5][1]
Change Skeds [#][5][2]
Renew One-time PINs [#][5][3]
Change Outputs [#][5][4]
Change PIN [#][5][5]
Change Another User’s PIN [#][5][6][1]
Change Another User’s PIN Authority
Level
[#][5][6][2]
Add a PIN [#][5][6][3]
Delete a PIN [#][5][8]
Turn Chime On/Off [#][6][1]
Select Chime Tone [#][6][2]
Select Chime Zones [#][6][3]
Set Partial On Zones [#][6][5]
All Areas On [#][8][0]
All Areas Off [#][8][1]
Auto-Forward On/Off [#][8][2]
Auto-Forward On Setup [#][8][3]
Auto-Forward Off Setup [#][8][4]
View Log [#][8][5]
Enable Installer PIN [#][9][2]