Bosch FPA-5000 - RMH 0002 a Relay Module for Mains Voltage

Modular Fire Panel Installation | en 117
Bosch Sicherheitssysteme GmbH System Information 09.2017 | 11.3 | F.01U.028.089
4.9.13 RMH 0002 A Relay Module for Mains Voltage
Danger!
The device contains live components.
Touching live components entails a risk of death or serious injury.
Disconnect the power supply before all installation work.
The module has two changeover contact relays (typeC) for monitored connection of external
elements with feedback, e.g.
– Electromagnetic door holders
– Fans
– Smoke dampers
Each relay has one NO (normally open) and one NC (normally closed) contact and is protected
by a 6.3A fuse.
The outputs are not monitored.
The maximum permissible contact load is 5A at 120V/230VAC and 5A at 30VDC.
The relay module can also be used as an extinguishing system interface in accordance with
VdS2496.
Figure4.70: RMH 0002 A Relay Module for mains voltage
Labeling Connection
NC1 | C1 | NO1 Relay 1
NC2 | C2 | NO2 Relay 2
FB1 + | FB1 - Feedback relay 1
FB2 + | FB2 + Feedback relay 2
The technical data can be found in RMH 0002 A Relay Module for mains voltage, page 155.