Bosch FPA-5000 - Consistency check

Modular Fire Panel Installation | en 59
Bosch Sicherheitssysteme GmbH System Information 09.2017 | 11.3 | F.01U.028.089
4.3.5 Installation Kits for 48cm (19”) Racks
FRK0019A Rack Installation Kit for All Wall Mounting Housings
The FRK 0019 A Rack Installation Kit is used to install wall mounting housings in 48cm (19'')
racks.
The two mounting brackets in the universal installation kit are fitted at distanceH (see ). The
dimensions of H for the different wall mounting housings can be found in the table below:
Housing H
PSS 0002 A 217mm
DIB 0000 A 217mm
PSB 0004 A 308mm
HCP 0006 A 409mm
HBC 0010 A 609mm
HBE 0012 A 609mm
H
Figure4.13: FRK0019A housing installation
Installation Kits for Frame Installation Housings
Special installation kits are available for installing frame installation housings in 48 cm (19'')
racks:
Housing type Installation kit Height unit
CPH 0006 A FRB 0019 A 15
MPH 0010 A FRB 0019 A 15
EPH 0012 A FRB 0019 A 15
PMF 0004 A FRM 0019 A 12
PSF 0002 A FRS 0019 A 6
USF 0000 A FRS 0019 A 6
No mounting frame is required when using the 48cm (19'') installation kits.