Bosch FPA-5000 - Networking; Connection to bis

Modular Fire Panel Product Description | en 23
Bosch Sicherheitssysteme GmbH System Information 09.2017 | 11.3 | F.01U.028.089
Product group Product name Connection via
Transmission
devices
AT3000 IP/GSM
AT3000 IP/GSM/Analog
AT3000 IP/GSM/ISDN
ENO 0000 B
Key deposits Connection via: ENO 0000 B
Door controls Connection via: – FAA-MSR 420
– FLM-420-RHV
2.7 Networking
Notice!
You will find detailed information about the CAN and Ethernet networking of the panels in the
Networking Guide available for download at www.boschsecurity.com.
2.8 Connection to BIS
The MPCPanel Controller can be connected to a building management system (BIS) via an
Ethernet connection and an OPC server.
The connection must be enabled with an ADC-5000-OPC license key (see ).
BIS
Figure2.8: Connection to BIS
For a multiple-building network, it is essential to clarify with the network administrator:
– whether the network is designed for multiple-building connections (e.g. there must be no
technical interference due to differences in grounding potential)
– whether the bus users are designed for this kind of network (e.g. sufficient bandwidth).