120 en | Installation Modular Fire Panel
09.2017 | 11.3 | F.01U.028.089 System Information Bosch Sicherheitssysteme GmbH
Figure4.74: PSK0001A - Inserting the labeling strip
FDP0001A Dummy Cover Plate
Figure4.75: FDP0001A Dummy Cover Plate
Fit the dummy cover plates on unused module slots in the front panels of the housings.
4.10 Cable Sets
Overview
There are various cable sets available for connecting the central components.
All cable sets are supplied with installation instructions ex works. You can also find the
installation instructions at www.boschsecurity.com by searching for the type designation of
the product. The document numbers of the installation instructions can be found in the footer
on every page of the document.
The table below shows the instructions available.