Modular Fire Panel Product Description | en 11
Bosch Sicherheitssysteme GmbH System Information 09.2017 | 11.3 | F.01U.028.089
Notice!
Planning Software by Bosch for fire alarm systems enables the system dimensions, the energy
requirements and the quantity and prices of the elements required to be estimated at each
different phase in the planning process.
The software is designed for planners and engineering offices that want to produce a
quotation for a fire alarm system.
2.2 MPC Panel Controller
The panel controller is the central component of the fire detection system. All messages are
shown on the display. The entire system is operated via a touch screen. The user-friendly user
interface adapts to the various situations. This allows correct operation that is both simple
and clear and targeted and intuitive.
The FSP-5000-RPS programming software enables adaptation to country-specific
circumstances.
Figure2.3: Overview of MPC system
Position Description
1 LEDs for displaying the operating status, with labeling strips
2 Key switch
3 Touch screen
4 Membrane keys
5 CAN bus, internal
To Next Page
Loading...
