124 en | Installation Modular Fire Panel
09.2017 | 11.3 | F.01U.028.089 System Information Bosch Sicherheitssysteme GmbH
– On every printout:
– The current date and the time are specified.
– The most recent event is always at the top
– Entries stored in the history log can also be printed if the operator has the appropriate
operational authorization.
– Always ensure the printer cover panel is closed properly. If the device contact is opened,
incoming messages cannot be printed, even at a later date, as the printer does not have
its own message memory. In this case, the message only appears on the display of the
control panel.
– If the supply of paper is nearing its end, this is indicated by a message on the display of
the control panel. When this message appears, you still have enough paper on the roll to
print approx. 200 lines of text.
Printer Settings using Jumpers
Notes:
– The jumpers BR2, BR3 and BR4 must not be inserted if connecting to the FPA-5000.
– Caution: Inserting jumper BR1 changes the character set from Western to Cyrillic.
To Next Page
Loading...
