Modular Fire Panel Product Description | en 17
Bosch Sicherheitssysteme GmbH System Information 09.2017 | 11.3 | F.01U.028.089
The HCP0006A and HBC0010A basic housings can be extended to meet individual
requirements using:
– HBE0012A Modular Extension Housing for an additional 12modules, and 2 x 12V/28Ah
batteries
– PSS0002A or PSB0004A Power Supply housings for additional power supply units and
12V/28Ah batteries
– DIB0000A Distribution Box
The DIB 0000 A Distribution Box is equipped with a distributor rail and is used to install
terminal strips.
Equipment Limits
The table below shows the maximum number of:
– Modules
– Panel rails (short PRS-0002-C, long PRD 0004 A)
Housing type Modules Short rail Long rail
HCP 0006 A 6 1 1
HBC 0010 A 10 1 2
HBE 0012 A 12 - 3
PSS 0002 A - - -
PSB 0004 A - - -
DIB 0000 A - - -
The table below shows the maximum number of:
– Panel controllers
– UPS power supply units
– Batteries
Housing type MPC UPS power supply
units
Batteries
HCP 0006 A 1 1 2x28Ah
HBC 0010 A 1 1 2x28Ah
HBE 0012 A - 1 2x28Ah
PSS 0002 A - 1 2x28Ah
PSB 0004 A - 1 4x28Ah
DIB 0000 A - - -
Installation Types
Various types of installation are possible:
– Surface mounted
– Installation in 482.6mm (19") racks
For surface mounting, the housing is mounted directly on the wall. For installation in
482.6mm (19") racks, the FRK0019A installation kit is used.
The housings have pre-formed cable bushings.
Front Doors
The housings can also be equipped with transparent front doors. The doors are made of
impact-resistant plastic and are available in two sizes (each with a lock on the left or right).