Modular Fire Panel Product Description | en 7
Bosch Sicherheitssysteme GmbH System Information 09.2017 | 11.3 | F.01U.028.089
The MPC Panel Controller is the central component of the system. All messages are shown on
the display. The complete system is operated via a touch screen. The user-friendly interface
adapts to the relevant situation. This allows correct operation that is both simple and clear
and targeted and intuitive. The FSP-5000-RPS programming software enables adaptation to
country-specific circumstances.
The panels can be networked with one another and with the remote keypad using the external
CAN bus interface. With a loop or bus structure, this networking is adapted to the conditions
of use (see Networking, page 23).
The FPA-5000 can be connected to the Bosch UGM Universal Security System and thus
integrated into large-scale systems.
Connection to a building management system (Bosch Building Integration System BIS) is
possible via an Ethernet interface using an OPC server (see Connection to BIS, page 23). The
FSM-5000-FSI Software Interface Package allows custom connections to other management
systems.
The FPA-5000 can be connected to a Plena Voice Alarm System. The Praesideo/PAVIRO
systems can be connected using an IP based interface module. See Connecting a Voice Alarm
System, page 24.
The FMR-5000-C Remote Keypad allows decentralized operation of the panel or the panel
network.
To Next Page
Loading...
Need help?
General
