EasyManua.ls Logo

Bosch ICP-EZM2 - PD6662 and DD243 Requirements; EN50131 Requirements

Bosch ICP-EZM2
118 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
See also
System Programming Items, page 48
PD6662 and DD243 Requirements
To comply with PD6662 and DD243, you must meet all of the EN50131-3 requirements and the
following requirements:
Maintenance: A qualified technician must check the system at least twice a year.
AC Power Supply:
Type: A
Rated Voltage: 230 V
Rated Input Frequency: 50 Hz
Rated Input Current: 250 mA maximum
Fuse Rating: 0.25 A, 250 V Slow Blow
Construction Materials: Enclosures and housings for the control panel, control center,
DX2010, wireless receiver, and wireless devices are made from materials that are
durable, secure, and resistant to attack by hand-held tools.
Confirmed Alarms: Set Expert Programming Item Number 124 to either Option 3 or 4.
Refer to System Programming Items, page 48 for more information.
The Easy Series control panel is designed to comply with PD6662:2004 as a Grade 2 system
that supports Notification Options A, B, C, or X with the appropriate notification devices
installed (devices not included with system).
EN50131 Requirements
The Easy Series control panel is designed to comply with EN50131-1 Security Grade 2,
Environmental Class II.
Installation, Programming, and Maintenance
Installation: Refer to Install System Components, page 25.
Programming: Refer to Programming, page 43.
Testing: Refer to System Test and Maintenance, page 66.
Maintenance: Refer to System Test and Maintenance, page 66.
Automatic Inhibit
Intruder Alarm and Fault Signal or Message: Set Expert Programming Item Number 131 to a value between 1 and
3.
Refer to System Programming Items, page 48 for more information.
Authorization Code: Set Expert Programming Item Number 892 to a value between 3 and 8.
Refer to Control Center Programming Items, page 60 for more information.
Logical and Physical Keys
Minimum Number of Combinations per User:
Passcodes: 15,625 (passcode length must be six digits)
Tokens: 42,000,000,000
Key Fobs: 2,800,000,000,000,000
Method Used to Determine Number of Combinations:
Passcodes: Digits 1 to 5 are allowed. For a six-digit passcode, all combinations are allowed.
Tokens: 32 bits. All combinations are allowed.
Key Fobs: 56 bits (48 serialized during manufacturing, 8 remain static)
1.6
1.7
Easy Series Control Panel Agency Approvals and Requirements | en 11
Bosch Security Systems, Inc. System Reference Guide 2014.09 | 01 | F.01U.306.221

Table of Contents

Other manuals for Bosch ICP-EZM2

Related product manuals