EasyManua.ls Logo

Bosch ICP-EZM2 - Device Specifications and Overview; Control Panel

Bosch ICP-EZM2
118 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Device Specifications and Overview
Control Panel
Enclosure
Dimensions (H x W x D): 37 cm x 31.8 cm x 8.5 cm (14.5 in x 12.5 in x 3.25 in)
Construction Material: Cold-rolled steel, zinc seal, 0.36 mm thick (20 Ga.)
Environmental Considerations
Relative Humidity: 93% at 32°C 2°C (89.6°F 35.6°F)
Operating Temperature: -10°C to +49°C (14°F to +120°F)
CE: -10°C to +40°C (+14°F to +104°F)
NF A2P: -10°C +55°C (+14°F to +131°F)
Storage Temperature: -10°C to +55°C (+14°F to +131°F)
Protection Level IP 30 - IK 04
Supervised Points
On-board Hardwire: 8
Single or dual end-of-line (2.2 k EOL) tamper point support
Point 1 supports two-wire smoke detectors
All points support four-wire smoke detectors
Enclosure tamper input (does not reduce point capacity)
Reaction time lower than 250ms
Programmable Outputs (PO)
On-board: 4
PO 1 only: Configurable relay
PO 2 to PO 4: Configurable solid state
PO 4 only: Internal supervised speaker driver option
PO 1 Relay Rating: Contacts: 2 A with no jumper installed; resistive loads only; in a NF A2P
certified installation: 1 A
Output: 1.2 A with jumper installed; resistive loads only; in a NF A2P
certified installation 1 A
Operating Voltage: 30 VDC maximum
PO 2 to PO 4 Rating: 400 mA current sink
Number of...
Users: 22
User 1: Master user
Users 2 to 21: System users
User 22: Duress user
Events: 500 history events, stamped with time and date
Tokens and Key Fobs: One per user (User 22 does not receive a token or key fob)
Phone Line
8
8.1
68 en | Device Specifications and Overview Easy Series Control Panel
2014.09 | 01 | F.01U.306.221 System Reference Guide Bosch Security Systems, Inc.

Table of Contents

Other manuals for Bosch ICP-EZM2

Related product manuals