Bosch ICP-EZM2 - Report Configuration

2 Set Point Type (Refer to Point Type
table)
Press [1] to select the current option.
Press [2] to hear more options.
Press [#] to exit Point Type.
Point Types:
– Disabled
– Perimeter (Entry or Exit)
– Interior (Follower)
– Perimeter Instant
– 24-Hour
– Fire Verified
– Fire Verified
– Fire Instant
Point Types (cont.):
– Silent Panic
– Interior Walkthrough
– Perimeter Exit Cancel
– Momentary Keyswitch
– Maintained Keyswitch
– 24-Hour Trouble
– User Emergency
# Exit Points
Return to the Installer Menu.
Report Configuration
Report Conguration
[1]
Account Number
[2]
Report Destination
[3]
Remote
Program Success
[#]
Exit
[1]
Route 1 Primary
[2]
Route 1 Backup
[3]
Route 2 Primary
[4]
Route 2 Backup
Format
Phone Number
or IP Address
Phone Number: Enter phone number to dial and follow prompts.
IP Address: enter “#” as rst character, then follow prompts.
Format
FormatFormat
Phone Number
or IP Address
Phone Number
or IP Address
Phone Number
or IP Address
[#]
Exit
[#]
Exit
[#]
Exit
[#]
Exit
ROUTE 1 ROUTE 2
Account Number Entries
Phone Number/IP Address Entries
Entry Key Press Entry Key Press
0 to 9 [0] to [9] 0 to 9 [0] to [9]
B [*][1] * [*][*]
5.1.3
Easy Series Control Panel Programming | en 45
Bosch Security Systems, Inc. System Reference Guide 2014.09 | 01 | F.01U.306.221