Account Number Entries Phone Number/IP Address Entries
Entry Key Press Entry Key Press
C [*][2] # [*][#]
D [*][3] . [*]
1
E [*][4] Pause [#]
F [*][5] Exit with Save [#][#]
2
Disable phone number [0][#]
Disable IP address 240.0.0.0
1
[*] = . between each IP address notation.
2
Press [#] twice within two seconds to exit without saving
your entry.
Outputs
Output devices consist of horns, bells, strobes, or sirens.
Outputs Enter an output number from 1 to 4
1 Set Output Function
– Press [1] to select the current
option.
– Press [2] to hear more options.
– Press [#] to exit Output Function.
Output Functions:
– Disabled
– Intrusion
– Intrusion Latching
– Fire
– Fire Latching
– Intrusion and Fire
– Intrusion and Fire
Latching
– System Reset
Output Functions (cont.):
– System On
– System Ready
– Key Fob On/Off
– Key Fob 2-sec Pulse
– User Controlled
– Interior Intrusion and
Fire
– System On (Unoccupied)
# Exit Points
Return to Installer Menu.
Notice!
When the installer PIN is entered at the keypad or phone, a 3 sec time window starts. During
that time window, a tamper alarm activates the interior siren for only 1 sec. Open the
enclosure door during this time to silence the sirens during maintenance. Once the enclosure
is closed, tamper alarm is restored after a 3 minute delay. Tampers are logged and reported.
Warning!
If you modify system parameters you are responsible for maintaining the system within the
scope of the standard and regulations that apply to the hardware and/or the system in which
it is used. In a NF A2P compliant installation, use only NF A2P listed components, and check
that each parameter is in the authorized range.
5.1.4
46 en | Programming Easy Series Control Panel
2014.09 | 01 | F.01U.306.221 System Reference Guide Bosch Security Systems, Inc.
To Next Page
Loading...
