M410 User Manual 8
Setup
Printer Settings
Printer Settings
Use the keyboard and screen to configure standard settings, such as the language. For an introduction
to the screen and keyboard, see “Using the Screen” on page 21 and “Using the Keyboard” on page 24.
Language
When turning the printer on for the first time, choose the language in which you want all printer menus,
functions, and data displayed.
To set the language for text on the screen:
1. Press
.
2
. Use the navigation keys to move through the menu until Language is highlighted
.
3
. Use the up and down navigation keys to select the desired languag
e.
4
. Pr
ess
to accept the choice.
Time and Date
Set the printer’s clock to the current date and time. Also set the format to use when adding the current
date or time to a label.
To set the date and time:
1. Press
.
2
. Use the navigation keys to move through the menu until Time/Date is highlighted
.
3
. Pr
ess
to accept the choice and display the time and date settings.
4. For information on how to use the screen, see “Settings Screens” on page 23. Most of
the
settings
on this screen are self-explanatory, but the following information may be
useful.
•
Display 24 Hour:
If this is selected, hours are numbered 1-24. Clear this field to number the
hours 1-12 and use
AM and PM
.
•
PM:
Not available if
Display 24 Hour
is selected. Clear this check box for AM; set it for PM.
5. Select OK and press .
6. Press to dismiss the menu. Alternatively, use the navigation keys to navigate to
the next setting that you want to configure.
Units
Set the unit of measure to inches or millimeters.
To Next Page
Loading...
