M410 User Manual 10
Setup
Software for Creating Labels
5. Select OK and press .
6. Press to dismiss the menu. Alternatively, use the navigation keys to navigate to
the next setting that you want to configure.
Font Settings
Choose the font to use when creating labels on the printer. These settings do not affect any currently
open label file. They take effect for the next new label file created.
To set the font:
1. Press .
2. Use the navigation keys to move through the menu until Font Settings is highlighted.
3. Press to accept the choice and display the font settings.
4. For information on how to use the screen, see “Settings Screens” on page 23.
•
Typeface:
Select the style of lettering.
The font types (Brady Fixed Width and Brady Alpine
give you the option of displaying a zero with or without a slash (0 or Ø) through it.
•
Attributes:
Select one or more of bold, italic, and underline. This sets the default attribute.
When editing a label, you can change the attribute for any character.
•
Units:
Choose whether to show the font size in points (a standard unit used in most word
processors) or millimeters.
5. Select OK and press .
6. For the font changes to take effect, clear all data:
a. Press .
b. Use the navigation keys to select Clear All, and press .
Note: You can use the FONT button to change the size and attributes for a line of text while editing
a label, but the values specified here in the SETUP menu will continue to be used as the
default on new labels and areas. (For information about areas see “Labels and Areas” on
page 38.)
Software for Creating Labels
In addition to creating labels on the printer, you can use labeling software. Install labeling software on
your computer, set up the connection to the printer, then use the software to design labels and send
them to the printer.
To Next Page
Loading...
