Brady M410 - Go to Area; Shortcut Keys; Delete Area

M410 User Manual 39
Editing Labels on the Printer
Labels and Areas
To add an area to a label:
1. Press .
2. Choose Add.
3. Press .
A new area is added at the end of existing areas and its number is reflected in the upper right corner of
the screen. The font size used on the first line of the previous area carries over to the new area. To
navigate between areas see “Go to Area” on page 39.
Only the current area displays on the editing screen. Use the print preview to view the entire label.
Go to Area
To move to another area on a label with multiple areas:
1. Press .
2. Select Go To, then enter the number of the area desired.
3. Press .
Shortcut Keys
• Press to move to the next area within a label with multiple areas configured .
• Press
to move to the previous area within a label with multiple areas
configured
.
Delete Area
Note: Areas can only be added and deleted on cartridges with continuous labels.
To delete an area:
1. Navigate to the area you want to delete. See “Go to Area” on page 39.
2. Press .
3. Choose Delete.
4. A confirmation message displays. Press
to confirm or to cancel.
+
+