M410 User Manual 21
General Operation
Using the Screen
Using the Screen
Use the printer’s screen to create labels, configure settings, and check status, among other functions.
Touch the screen with your finger to make a selection.
The screen shows a representation of the installed cartridge (or the last known cartridge) in the correct
color. The screen displays one label at a time. For labels with multiple areas, only one area displays at
a time. Use the preview to see all areas at once. See “Preview” on page 30.
1. Cartridge. The part number of the installed cartridge.
2. Label size. The word Auto after the label size indicates that a cartridge with continuous labels
(as opposed to pre-sized) is set to automatically size to the label contents.
3. Font size. The letter "A" indicates that it is set to Auto. See “Font Size” on page 35.
4. Label type. The printer provides tools for editing labels for specific purposes, such as wire
markers, terminal blocks, and vials. See Chapter 5: Label Types.
5. Rotation. Degrees that the label is rotated. See “Rotation” on page 40.
6. Area number. The total number of areas on the label and the area currently being edited. See
“Labels and Areas” on page 38.
7. Supply levels.
8. Caps lock. This symbol is visible when the caps lock is on.
9. Cursor. Marks the insertion point for data entry.
10. Battery charge remaining.
To Next Page
Loading...
