M410 User Manual 29
General Operation
Starting a New Label File
Starting a New Label File
After editing a label file, the labels remain on the screen. You must clear the existing file before starting
a new one.
To start a new label file:
1. If desired, save the current label. See “Saving Labels Created on the Printer” on page 63.
2. Press .
3. Select Clear All and press
.
The printer displays a message confirming that you want to
delete the label from the workspace.
4. Press
to clear the label from the workspace so that you can start a new label. It does not
delete the saved file.
If you have saved the labels, the saved file still exists.
5. Enter data for your next label file or use the LABEL TYPE button to select a different type of
label.
Printing
There are several scenarios for printing from the M410 printer.
• Create a label on the printer, and print from the editor. See
“Print” on page 29
.
• Create a label in Brady Workstation and print it. See the help in the Brady Workstation app.
• Save label files created on the printer to print later.
The following sections cover the print-related keys on the printer.
Print
For information how to print from computer software, refer to your software documentation.
For information on setup and connection see “Software for Creating Labels” on page 10 and
“Connecting the Printer” on page 12.
To Next Page
Loading...
