M410 User Manual 40
Editing Labels on the Printer
Formatting Labels and Areas
Formatting Labels and Areas
Justification
Justification refers to the alignment of data between boundaries (margins) on a label or in an area.
There are two types of justification: horizontal and vertical. Horizontal justification (H. Justify) aligns
data between the left and right boundaries of a label or area, while Vertical justification (V. Justify)
aligns data between the top and bottom boundaries of a label or area. Justification is applied to an
area or a label. It cannot be applied line-by-line.
To apply justification:
1. If the label has multiple areas, navigate to the area that you want to justify. See “Go to Area”
on page 39.
2. Open the label or area menu.
• For a label, press .
• For an area, press .
3. Choose H. Justify or V. Justify.
4. Choose the horizontal or vertical justification desired.
5. Press .
Every line of data on the label or in an area is justified according to the option selected. Different
justification can be applied to different areas on one label.
Rotation
Rotation flips the data on a label or in an area counter-clockwise in 90° increments. Rotation affects all
data on a label or in an area.
Horizontal Justification Vertical Justification
Left
Center
Right
Top
Middle
Bottom
To Next Page
Loading...
