Brady M410 - Installing the Windows Driver (Optional)

M410 User Manual 11
Setup
Installing the Windows Driver (Optional)
Brady Workstation software provides a variety of apps to simplify label creation for specific purposes. It
also provides easy-to-use apps for custom label design. Depending on the package that you
purchased, the printer comes with either Brady Workstation
Basic Design Suite or Brady Workstation
Product and Wire Identification Suite.
To install Brady Workstation software:
1. Make sure your computer is connected to the internet.
2. Go to BradyID.com.au/workstation.
3. Follow the instructions on the screen to download and install the software.
4. If you have the Brady Workstation Product and Wire Identification Suite, the software will
prompt you for activation when you open an app that requires activation. Follow the
ins
tructions on the screen to activate the software. Use the license ID and password on the
printed insert that came with the printer.
For other Brady Workstation software or additional licenses, go to BradyID.com.au/workstation or
contact your Brady representative.
Installing the Windows Driver (Optional)
If you are using Brady Workstation software, you do not need to install the windows driver. Skip to
“Connecting the Printer” on page 12.
If you are using older Brady software or third-party software, you must install the Windows driver. The
driver installation is included on the USB drive that came with the printer.
To install the Windows driver:
1. Insert the USB drive into a USB port on the computer that has Brady Workstation software.
2. Use Windows Explorer to open the Brady M410 Printer Driver folder on the USB drive.
3. Double click M410_Printer_Driver.exe and follow the instructions on the screen.