M410 User Manual 86
Regulatory Compliance
Agency Compliance and Approvals
Batteries Directive 2006/66/EC
This product contains a lithium coin cell battery. The crossed-out wheeled bin shown
to the left is used to indicate 'separate collection' for all batteries and accumulators in
accordance with European Directive 2006/66/EC. Users of batteries must not
dispose of batteries as unsorted municipal waste. This Directive determines the
framework for the return and recycling of used batteries and accumulators that are to
be collected separately and recycled at end of life. Please dispose of the battery
according to your local regulations.
Notice to Recyclers
To remove the lithium coin cell battery:
1. Disassemble printer and locate the lithium coin cell battery located on the main circuit board.
2. Using a small screwdriver, pry the battery from its holder and remove the battery from the
board. Dispose of in accordance with local regulations.
Turkey
Turkish Ministry of Environment and Forestry
(Directive on the Restriction of the use of certain hazardous substances in electrical and electronic
equipment).
Türkiye Cumhuriyeti: EEE Yönetmeliğine Uygundur
Eurasian Economic Union (EAEU)
China
China RoHS Hazardous Substance Table related to this product is available at
www.bradyid.com/M410compliance.
警
告
此为
A
级产品。在生活环境中，该产品可能会造成无线电干扰。在这种情况下，可能需要用户对干扰
采取切实可行的措施。
仅适用于非热带气候条件下安全使用
Taiwan
Class A Statement
警告 : 為避免電磁干擾，本產品不應安裝或使用於住宅環境
To Next Page
Loading...
