Brainchild PR Series User Guide

Page 67 of 113
Error Code Display Symbol Error Description Corrective Action
28 CAPE
Memory comparison
error, different value
detected in the
EEPROM and mapped
RAM
1.Check and correct the
wiring and grounding
problems to minimize
the system noise.
2.Return to factory for
repair.
29 EEPE
EEPROM can't be
written correctly
Return to factory for
repair.
32 CJER
Cold junction
compensation device(s)
malfunction
Return to factory for
repair.
33 YYER
Key switch shorted or
related PCB circuit
shorted
Return to factory for
repair.
34 LLL2
Input 2 ( IN2 ) signal too
low
1.Check if the input 2
sensor used is accordan
t
with IN2 type selection.
2.Check the connection
polarity of input 2
sensor.
3.Replace input 2
sensor.
35 HHH2
Input 2 ( IN2 ) signal too
high
1.Check if the input 2
sensor used is accordant
with IN2 type selection.
2.Replace input 2
sensor.

Brainchild PR Series Specifications

General

Brand	Brainchild
Model	PR Series
Category	Control Unit
Language	English