Click the Show thumbnail button to view a thumbnail of the selected service.
Service node
Service name: Name of the highlighted service, as signalled in SDT or VCT
Service ID: Service ID number
Service type: Service type
Service provider
name:
The name of the service provider as signalled in NIT
Current bitrate: The current service bitrate
Minimum bitrate: The minimum service bitrate detected during the monitoring
period
Maximum
bitrate:
The maximum service bitrate detected during the monitoring
period
PMT PID: The service's PMT PID
PCR PID: The service's PCR PID
ECM PIDs: The service's ECM PID(s) and name of CA system(s). This
information will only be displayed if one or more service
components are scrambled.
Components: A list of the service component PIDs and component type
EPG: If DVB EIT is present in the stream and EIT table IDs are
configured in the Setup - ETR view, EIT present/following is
displayed. If EIT schedule is present in the stream, a blue
'Show full EPG' link is displayed. By clicking the link it is
possible to view the EIT schedule information.
When clicking a service component, associated key parameters and references will be
displayed.
For PIDs carrying PCR it is possible to view a PCR jitter histogram by clicking the blue
'show histogram' link. If one of the blue service links is clicked, service details are
shown.
Service component node
Current bitrate: The current component bitrate
Minimum bitrate: The minimum component bitrate detected during the
monitoring period
Maximum
bitrate:
The maximum component bitrate detected during the
monitoring period
Carries PCR: An indication of whether the PID carries PCR or not. The value
may be 'Yes' or 'No'. If PCR is carried by the PID, a blue 'show
PROBE USERS' MANUAL VERSION 5.0
2014 © BRIDGE Technologies Co AS - Bentsebrugata 20 - N-0476 Oslo, Norway - tel: +47 22 38 51 00 -
www.bridgetech.tv
123
To Next Page
Loading...