PID thresholds: Selection of the PID threshold template that should be
assigned to the current frequency
Service
thresholds:
Selection of the Service threshold template that should be
assigned to the current frequency
RF thresholds: Selection of the RF threshold template that should be
assigned to the current frequency
VBC thresholds: Selection of the VBC threshold template that should be
assigned to the current frequency
Disable tuning: If this box is checked the transport stream associated with
the current frequency will not be monitored.
PROBE USERS' MANUAL VERSION 5.0
2014 © BRIDGE Technologies Co AS - Bentsebrugata 20 - N-0476 Oslo, Norway - tel: +47 22 38 51 00 -
www.bridgetech.tv
198
To Next Page
Loading...