ETR thresholds: Selection of the ETR threshold template that should be
assigned to the current frequency
PID thresholds: Selection of the PID threshold template that should be
assigned to the current frequency
Service
thresholds:
Selection of the Service threshold template that should be
assigned to the current frequency
SAT thresholds: Selection of the SAT threshold template that should be
assigned to the current frequency
VBC thresholds: Selection of the VBC threshold template that should be
assigned to the current frequency
Disable tuning: Disable tuning for frequencies that should not be monitored. If
tuning for a stream is not disabled it will automatically be part
of the round-robin analysis loop.
It is also possible to add new frequencies manually by copying existing tuning list
entries using the Duplicate highlighted button.
PROBE USERS' MANUAL VERSION 5.0
2014 © BRIDGE Technologies Co AS - Bentsebrugata 20 - N-0476 Oslo, Norway - tel: +47 22 38 51 00 -
www.bridgetech.tv
210
To Next Page
Loading...