Brookfield TT100 - Table C-1:Shear Rates and Factors for 2.440 ID Rotor; Table C-2:Shear Rates and Factors for 1.450 ID Rotor

Appendix C - Viscosity Range Change
C-4 P/N M/97-520
Table C-1: Shear Rates and Factors for 2.440 ID Rotor
Stators/RPM
Shear Rate
SEC
-1
/RPM
Geometry
Factor
Uncoated
Geometry
Factor
Teflon Coated
TT100-4 2 1.101 1.02
TT100-4B 4 0.504 0.476
TT100-4C 1.161 2.804 1.91
TT100-4CZ 1.161 1.916 1.88
TT100-4D 0.67 4.13 3.817
TT100-4E 0.37 12.5 -
TT100-4F - 29.41 -
TT100-4G 1.42 1.353 1.333
TT100-4H 0.34 13.513 -
TT100-4VS1 0.891 2.445 2.347
TT100-4VS2 1.67 1.205 1.147
Serrated 1.00 1.962 1.60
Table C-2: Shear Rates and Factors for 1.450 ID Rotor
Stators/RPM
Shear Rate
SEC
-1
/RPM
Geometry
Factor
Uncoated
Geometry
Factor
Teflon Coated
TT100-4N 1.703 4.55 4.55
TT100-4F - 13.661 -