In-Line Viscometer Description
1-14 P/N M/97-520
Options
The following optional equipment is available to enhance the operation of
the TT100 In-Line Viscometer when installed within certain product
stream applications. Refer to Appendix A and contact Brookfield
Engineering Laboratories, Inc. for more information on these options and
accessories.
Double Mechanical Seal
A double mechanical seal can be installed in the following the service
conditions which are too severe for the standard (single) mechanical seal:
• Vacuum
• Abrasive Slurries
• Toxic Fluids
• Fluids which harden when exposed to air and/or elevated
temperatures
Elliptical Baffle
The Elliptical Baffle can be installed when measuring highly viscous or
low flow product streams to direct sufficient flow through the annulus.
Perforated Rotor
The Perforated Rotor can be installed to increase product turnover within
the measuring annulus.
Serrated Stator
The Serrated Stator can be installed to ensure shearing by overcoming
slippage between the stator and the fluid being measured. The serrated
stator is useful with certain product streams such as slurries.
Flushing Endcap
The Flushing Endcap design facilitates cleaning the measuring annulus and
torsion element. Compatible solvent can be introduced under pressure
when cleaning while the In-Line Viscometer is on-line and empty of
process fluid.
To Next Page
Loading...
