TT100 In-Line Viscometer Installation, Operation, Maintenance and Service Instructions
P/N M/97-520 2-7
Figure 2-4:CENELEC - 115 or 230 VAC 50/60 Hz Installation
CUSTOMER SUPPLIED MOTOR POWER CABLE
SENSING CABLE
POWER CABLE
POWER CABLE
NOTE: REFER TO DRAWING NUMBER CA1-024 (115 VAC) OR CA1-025 (230 VAC) IN APPENDIX B
FOR ELECTRICAL CONNECTIONS.
NOTE: ALL CONNECTIONS WITHIN HAZARDOUS AREA SHALL BE TERMINATED
ACCORDING TO CENELEC SPECIFICATIONS.
TORQUE SENSOR
ELECTRONICS
ENCLOSURE
CUSTOMER SUPPLIED 4 - 20 mA OUTPUT SIGNAL CABLE
MOTOR CONTROL
ENCLOSURE
HAZARDOUS (CLASSIFIED) AREA
NON-HAZARDOUS AREA
NON-HAZARDOUS AREA
CUSTOMER SUPPLIED CONDUIT
To Next Page
Loading...
