Brookfield TT100 - Tools Required

Service
6-2 P/N M/97-520
Tools Required
Table 6-1 provides a list of tools that are required for viscometer service.
Refer to Appendix A and contact Brookfield Engineering Laboratories,
Inc. for price and availability of the special tools listed in Table 6-1.
Table 6-1: Tools Required
Tool Tool P/N
Armature Assembly Wrench TT100-1T
Insulator Centering Fixture TT100-101TY
Medium Straight Blade Screwdriver N/A
Standard Hex Wrench Set N/A
Metric Hex Wrench Set N/A
Large Adjustable Wrench N/A
Snap Ring Pliers N/A
Mallet N/A
Center Punch N/A
Motor Gearbox Lubricant
(See Note)
N/A
NOTE: Use motor gearbox lubricant Mobil Lith AW #00
without EP Additives or equivalent.