TT100 In-Line Viscometer Installation, Operation, Maintenance and Service Instructions
P/N M/97-520 1-1
Section 1 - In-Line Viscometer Description
Introduction
The Brookfield Model TT100 In-Line Viscometer is a highly sensitive
versatile instrument that measures process fluid viscosity in a fully flooded
product stream under pressure or vacuum. Brookfield In-Line Viscometers
are unaffected by changes in pressure, laminar flow, or density.
The TT100 In-Line Viscometer generates a 4 - 20 milliampere (mA) or
0 - 10 Volts DC (VDC) signal proportional to process fluid viscosity. The
signal is stable, can be transmitted over long distances with minimal loss,
and is not affected by noise. Adjustable electronic damping maintains
signal quality under severe process conditions.
The TT100 In-Line Viscometer, shown in Figures 1-1 and 1-2, can be used
in a variety of industrial applications where the viscosity of chemical,
coating, fuel oil, and many other process fluids must be controlled or
monitored.
Features and Benefits
The TT100 In-Line Viscometer incorporates the following features:
• Easy start-up, operation, and cleaning
• Instantaneous response
• Optional selectable dual viscosity range
• Continuous linear output signal (4 - 20 mA) or (0 - 10 VDC)
• Coaxial cylinder measurement geometry for viscosity values at
defined shear rates
• Optional temperature compensation
The TT100 In-Line Viscometer provides the following benefits:
• Highly sensitive measuring system unaffected by changes in
pressure, laminar flow, or density.
To Next Page
Loading...
