Brother HL-2400C - Program Version Display Mode

V-9
2.5 Program Version Display Mode
This mode displays the firmware version of the controllers.
<Procedure>
1) While holding down the Font button, turn on the power.
2) Hold down the Font button until Year/Month/Date of the program is displayed.
PROG XXXX/XX/XX
3) Press the Continue button. Hour/Minute/Second of the program is displayed.
PROG XX/XX/XX
4) Press the Continue button. Year/Month/Date of the font data is displayed.
FONT XXXX/XX/XX
5) Press the Continue button. Hour/Minute/Second of the font data is displayed.
FONT XX/XX/XX
6) Press the Continue button. The version of the program and font data is displayed.
VERSION X.XX
7) Press the Continue button. The version of the engine firmware is displayed.
LDAVER X.XX
Year Date
Month
Year
Month
Date
Hou
r
Hou
r
Minute
Minute
Version
Version
Second
Second