CONTENTS
CHAPTER I PRODUCT OUTLINE....................................................I
-1
1. FEATURES......................................................................................................I-1
2. PARTS NAMES & FUNCTIONS......................................................................I-4
3. INTERNAL STRUCTURE................................................................................I-6
4. DESCRIPTION OF CONTROL PANEL...........................................................I-7
4.1 Video Controller Mode...........................................................................................................I-7
4.2 Engine Controller Mode.........................................................................................................I-7
CHAPTER II SPECIFICATIONS......................................................II-1
1. RATING..........................................................................................................II-1
2. GENERAL SPECIFICATIONS........................................................................II-2
2.1. Printing................................................................................................................................II-2
2.2. Functions.............................................................................................................................II-3
2.3. Electrical and Mechanical...................................................................................................II-3
2.4. Paper Specification.............................................................................................................II-4
3. ENVIRONMENTAL CONDITION.....................................................................II-8
3.1 Ambient Temperature / Humidity / Altitude...........................................................................II-8
CHAPTER III INSTALLATION........................................................III-1
1. CONDITIONS REQUIRED FOR INSTALLATION.........................................III-1
1.1. Environmental Conditions..................................................................................................III-1
1.2. Basic Layout of Printer Set-up Location.............................................................................III-1
2. UNPACKING.................................................................................................III-2
2.1 Unpacking of Printer............................................................................................................III-2
2.2 Unpack the Starter Kit.........................................................................................................III-4
3. INSTALLATION WORK.................................................................................III-5
3.1 Install the OPC Belt Cartridge.............................................................................................III-5
3.2 Install the Toner Cartridge to the Printer.............................................................................III-6
3.3 Install the Oil Bottle and Fuser Cleaner..............................................................................III-7
3.4 Test Print.............................................................................................................................III-8
CHAPTER IV STRUCTURE OF SYSTEM COMPONENTS............IV-1
1. BASIC STRUCTURE.....................................................................................IV-1
1.1 Print System and Transfer System....................................................................................IV-6
1.2 Scanning System.............................................................................................................IV-21
1.3 Paper Transportation System..........................................................................................IV-23
1.4 Fusing Unit.......................................................................................................................IV-25
To Next Page
Loading...
