Brother HL-2400C - Cleaning the Register Roller

VI-7
1.2.1 Cleaning the Register Roller
The register roller should be cleaned according to the periodic maintenance cleaning
cycle set out in Table 6-3.
<Tools to Prepare>
Cotton cloth (2
∼
3 pieces)
<Cleaning Procedure>
1) Turn off the power supply, and unplug the power cable.
2) Open the rear access cover (transfer unit).
3) Using a cotton cloth, clean the register roller incorporated in the transfer unit to
remove the paper dust.
Fig.6-1
CAUTION
NEVER use alcohol or similar solvents for cleaning the register roller.
Transfer Unit
Register Roller